Question: I have the square digital CL gauges connecting a CL Hub that has no open ports. I understand that I’ll need to add a CL Hub to have an open port for this adapter. Can you tell me what else I’ll need to connect the two hubs, what ports to connect them and will I need caps to cap off the two open ports on the new Hub? Also, is this all I will need to have my engine data display on my Lowrance MFD?
16 September, 2021
Yamaha Command Link to NMEA2000 Adapter Cable - W/Existing NMEA2000 Network
You will need to purchase a BUS harness from a Yamaha dealer, this will go to the BUS port on each hub. SIMYAMAHA is a great source for parts. You can use the BOE-003 cable if you have an existing NMEA2000 network. One side goes to a NMEA2000 t-connector and the other to an open device port.