Small amps, big power

JL Audio's MHD Series amplifiers offer the ultimate in high performance from an ultra-compact chassis. They combine legendary high-end technology and rugged construction, so you can enjoy world-class sound that'll keep playing strong in the demanding marine environment. These Class D amplifiers use less power, take up less space, and generate less heat than traditional amp designs. JL Audio tests their MHD Series amplifier designs in the most extreme conditions to ensure reliable performance. Powder-coated aluminum panels and heatsinks, along with stainless steel connectors and screws, ensure flawless performance in humid and corrosive conditions.

JL Audio technology goes to work for you

MHD Series amplifiers reproduce your music with exceptional accuracy, so you'll hear high-fidelity sound even under the most demanding conditions. JL Audio uses Single Cycle Control™ technology to eliminate the excessive signal distortion that's plagued Class D amplifiers in the past, so you get all the benefits of this space-saving design without a down side. Differential-balanced inputs eliminate noise before it hits the preamp stage, and allow you to connect the amp to just about any in-dash stereo. You'll hear clear, true, studio-quality audio, exactly what you expect from JL Audio.

Power your entire system with one compact amp

The 5-channel MHD900/5 amplifier pushes 100 watts RMS per channel to two sets of full-range speakers, plus 500 watts RMS to a sub — all from a 2" tall chassis that's about the size of a sheet of computer paper. Or, you can bridge the front and rear channels to drive 150 watts RMS each into two speakers, while still running your sub at 500 watts.

The regulated power supply allows this amp to deliver its rated power to a wide range of impedances, even when voltage levels drop during heavy use. Removable power and speaker plugs make it easy to pop this amp out if you need the space in your cargo area.

Details:

• 5-channel amplifer
• 100 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 (at 1.5-4 ohms)
• 75 watts RMS x 4 (at 1.5-3 ohms) + 500 watts RMS x 1 (at 1.5-4 ohms)
• 150 watts RMS x 2 bridged (at 3-6 ohms) + 500 watts RMS x 1 at (1.5-4 ohms)
• variable high-pass filter on front and rear channels (50-500 Hz, 12 or 24dB/octave)
• variable low-pass filter on subwoofer channel (50-500 Hz, 12 or 24dB/octave)
• subsonic filter on sub channel (24 dB/oct at 30 Hz)
• removable power and speaker plugs
• optional wired remote for level control
• Class D amplifier design
• MOSFET power and output stages
• differential-balanced inputs eliminate noise from your vehicle's electrical system
• speaker- and preamp-level inputs (speaker-level input requires an optional adapter)
• preamp outputs
• 4-gauge power and ground leads and a 60-amp fuse recommended — wiring and hardware not included with amplifier
• no onboard fuses — when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended
• 8-7/8"W x 2"H x 10-3/4"D
• warranty: 2 years

Return Policy

Your complete satisfaction is our #1 priority. We understand that purchasing on-line is sometimes difficult without being able to touch and feel the product. Because of this, we offer several return options to insure your shopping experience with us is a pleasant one.

To request a RMA (return authorization number):

Email Us to request a RMA or use the form at the bottom of our Contact Us page to create a support ticket. After you request a RMA, please sit tight and we will send you return instructions by e-mail.

We offer the following return options:

• Returns will not be accepted without a RMA (return authorization number).
• Returns due to our error or on products that are defective from the manufacturer will gladly be returned or exchanged at no cost.
• Items may be returned for a refund (less shipping) within 30 days from when you received your shipment.* The item must be in new, resaleable, unused condition and in its original packaging.
• A 15% processing fee will apply to all returns that are in un-saleable condition, or do not include the original packaging (boxes, labels, tags, etc.).
• Products being returned must be shipped freight pre-paid; no COD's. (If the return is due to our error or product defect, we will provide you with a prepaid shipping label.)
• Shipments refused by the customer are subject to a 15% processing fee. Original shipping and handling fees are non-refundable.
• If your order originally qualified for and was shipped free, shipping charges will be deducted from the refund amount if the return causes your order total to drop below the required minimum for free shipping.
• Refunds must be issued to the original payment method used. If the original payment method is not available, a store credit will be issued.

We do not accept returns on:

• Any item that is returned more than 30 days after delivery.
• Any item that is not in its original condition, is damaged, used, or is missing parts.
• Special order, closeout, or discontinued products.
• Software and Cartography
• Liferafts

Guarantees and Warranties:

BOE Marine will stand behind all products we sell with regards to manufacturing defects in workmanship and material for 30 days. After 30 days defective products should be returned to the manufacturer for warranty repair. We will always do everything in our power to take care of the problem regardless of when purchased.

Please call if you have any questions.

* A 15% deduction may apply to certain items (like software or chart cards).

International Customers, please see our International Shipping Policy

jam 11/9/10